Submersible sewage pump in Naipu
|Payment Type:||L/C,T/T,Western Union|
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||20 Days|
|Place of Origin:||shijiazhuang|
Model No.: WQ Submersible sewage pump
Submersible sewage pump introduction:
1. The unique single-blade or double-blade impeller structure is adopted to greatly improve the sewage passing ability, which can effectively pass 5 times the fiber diameter of the pump and about 50% of the solid particles with the diameter of the pump diameter.
2. The mechanical seal adopts the new hard and rotten titanized tungsten material, which can make the pump run safely for more than 8000 hours.
3, the overall structure is compact, small volume, small noise, energy saving effect, convenient maintenance, no need to build pump room, can work underwater, greatly reduce the project cost.
4. The pump seal oil chamber is equipped with high-precision anti-interference leakage detection sensor, and the stator windings are embedded with thermosensitive element to automatically protect the pump motor.
5. The automatic control cabinet can be equipped according to the needs of users to automatically protect the pump from water leakage, electricity leakage, overload and overtemperature, thus improving the safety and reliability of the product.
6. At the beginning of float, the pump can be started and stopped automatically according to the required change of liquid level. It is very convenient to use without special personnel.
7. WQ series can be equipped with double guide rail automatic coupling installation system according to users' needs, which brings greater convenience for installation and maintenance, so that people do not have to enter the sump for this.
8. It can be used within the full head without overload of the motor.
9. There are two different installation methods: fixed automatic coupling installation system and mobile free installation system.
WQ series non-blocking stationary submersible sewage pump service conditions:
1. Sewage pump series are applicable when the rated voltage is 380V and the power frequency is 50Hz
2. The temperature of the medium shall not exceed 40 ° c, the density of the medium shall be less than 1150kg/m3, and the PH shall be within the range of 5-9;
3. The altitude shall not exceed 1000 meters;
4. The annual viscosity of the conveying medium shall not exceed 1000CP;
5. When the product works, it must be completely submerged, but the diving depth shall not exceed 10m;
6. The material of the product is mainly cast iron, which cannot be used in highly corrosive or corrosive media;
Shijiazhuang Naipu Pump Co., Ltd.
Shijiazhuang Naipu Pump Co.,Ltd is a professional manufacturing enterprise of slurry pumps located in high and new technology development zone. The enterprise has one group of high quality technical and management talent working in Design, R & D, Production, Sales and Services. The technical team consists of talents specialized in hydraulic machinery, casting, heat treatment, engineering, material science and machining. The company manufactures its products using advanced technique based on well built management and sales & service system. Product quality is guaranteed with various test and inspection facilities.. Naipu is specialized in the manufacture and sales of slurry pump and pump parts, especially the design and manufacture of products made with high abrasive, anti corrosive rubber material, including NP-AH(R).NP-M.NP-HH.NP-SP(R).NP-G series slurry pump, NP-ZG.NP-ZJG series slurry pump, NP-WS series dredging pump and NP-PNJ series slurry pump. The products are widely used in mining, power, metallurgy, coal, dreading, building material and Other Industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries. Meeting customers` technical requirements and with a long lifespan, lower cost and high safety, our products are sold well all over of china and far to southeast Asia, Noth America, South America,Russia and etc. We are confident that we can offer customers satisfying products and services with our continuous efforts in product research and improvement. We look forward to working with customers domestic and abroad to build a promising future. We can develop and produce a range of pumps according to different media situation to meet different duty requirment. There are rubber material (R08 , R12, R26, R33, R38, R55, S03,S12,S31,S21,S51,S52 U01 and etc) , wear resistant metal material( A05,A07, A33, A49, A61 and etc) ,Corrosion Resistant stainless steel material (201,304, 316, 316lL and etc ) , fully meet customers` request. We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.
- Company Name: Shijiazhuang Naipu Pump Co., Ltd.
- Representative: shushenwang
- Product/Service: Horizontal Slurry Pumps , Vertical Slurry Pumps , Submersible Slurry Pumps , Slurry Pump Spare Parts , OEM Slurry Pump And Parts , AH Model Slurry Pumps
- Capital (Million US $): 5000000RMB
- Year Established: 2006
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: taiba road,shijiazhuang city
- Contact Person: Ms. Betty Zhang
- Tel: 86-0311-87162903
Premium Related Products